Tire Pressure Check
Home / Tire Pressure by Vehicle / Toyota / Toyota Camry TRD

Toyota Camry TRD Tire Pressure

The recommended cold tire pressure for the Toyota Camry TRD is 35 PSI for all four tires across every trim and model year covered on this page. Tire size and trim may shift the recommended value by 1–2 PSI; verify against the driver-side door jamb sticker for your specific configuration (235/40R19).

Recommended Tire Pressure (Cold)

35
PSI — All four tires
2.4
BAR
241
kPa
60
Spare PSI

Always check on cold tires (parked 3+ hours). Verify on driver-side door jamb sticker.

All data is for informational purposes only. Always refer to your vehicle's owner's manual for the correct tire pressure.

Tire Pressure by Tire Size

Tire SizeFront PSIRear PSI
235/40R193535

Tire Pressure by Model Year

Select your Toyota Camry TRD model year to see the exact tire pressure specifications for that year, including any tire-size-specific variations.

YearFront PSIRear PSI
20203535View →
20213535View →
20223535View →
20233535View →
20243535View →

How to Check Tire Pressure on Your Toyota Camry TRD

Check cold (parked 3+ hours) with a gauge. Mind the generation split: the 2018-2024 Camry (XV70) came in gas and hybrid versions, while every 2025+ Camry (XV80) is a hybrid and the lineup was cut to LE, SE, XLE, and XSE (the TRD and V6 versions were discontinued after 2024). The recommended cold pressure is 35 PSI across all of them.

How to Reset the TPMS Light on a Toyota Camry TRD

After inflating to the door-jamb spec, reset the warning baseline from the multi-information display. On 2018-2024 Camrys: Settings (gear icon) > Vehicle Settings > press and hold OK > TPWS > Set Pressure, then hold OK until the warning light blinks slowly 3 times (some trims also have a physical TPMS button low-right of the steering column or in the glove box). On 2025+ models: Settings > Vehicle Settings (hold OK) > TPWS setting > Tire Pressure Setting, then choose Setting by Current Pressure (or Setting by Specified Pressure to enter target values). Finish by driving at 25 mph or more for 10-30 minutes to complete registration.

If the light returns after a reset, re-check cold PSI on all four tires plus the spare, then inspect for a slow leak. Persistent warnings usually mean a faulty TPMS sensor (typical replacement cost: $50–$100 per wheel at an independent shop).

Frequently Asked Questions

What is the recommended tire pressure for a Toyota Camry TRD?

The recommended cold tire pressure for the Toyota Camry TRD is 35 PSI for all four tires. Always verify against the driver-side door jamb sticker for your specific trim and tire size (235/40R19).

How do I reset the TPMS light on a Toyota Camry TRD?

After inflating to the door-jamb spec, reset the warning baseline from the multi-information display. On 2018-2024 Camrys: Settings (gear icon) > Vehicle Settings > press and hold OK > TPWS > Set Pressure, then hold OK until the warning light blinks slowly 3 times (some trims also have a physical TPMS button low-right of the steering column or in the glove box). On 2025+ models: Settings > Vehicle Settings (hold OK) > TPWS setting > Tire Pressure Setting, then choose Setting by Current Pressure (or Setting by Specified Pressure to enter target values). Finish by driving at 25 mph or more for 10-30 minutes to complete registration.

Does the Toyota Camry TRD have a separate tire pressure for a performance or hybrid trim?

No — the recommended cold PSI is the same across every Toyota Camry TRD configuration on the standard tire size (235/40R19). Performance trims, when equipped with wider tires, may list a different PSI in the tire-size table above.

Why does my Toyota Camry TRD tire pressure read higher than 35 PSI after driving?

Driving heats the tires and raises the PSI reading by 2–4 PSI. The 35 PSI recommendation is a cold pressure measured before driving or after at least 3 hours parked. Never deflate to 35 PSI after driving — you'll end up under-inflated once the tires cool.

What happens if my Toyota Camry TRD tire pressure is too low?

Under-inflated tires increase rolling resistance, reducing fuel efficiency by up to 3%. They wear faster on the outer edges, generate excess heat that can cause blowouts at highway speeds, and reduce braking and handling performance. If your TPMS warning light is on, check your tire pressure as soon as possible.

Need a reliable tire pressure gauge? See our guide to the best tire pressure gauges →